RFID Module X3RP Dual Interface
19,90 € – 20,90 €
A RFID reader board in the NFC frequency range of 13.56MHz with USB UID output, as well as UART TTL interface. This reader board has an excellent readout range and reads all NFC implants in the IS01443A. Including NTAG216, as well as all common MIFARE Classic®transponders and implants.
Description
This RFID reader board supports with integrated 13.56MHz antenna, not only USB as keyboard input, but also the standardized UART interface. The communication takes place thanks to TTL without level conversion. In addition, the RFID board can also be integrated into Arduino systems. The required power can be supplied via the included USB cable and operates at 60mA. The board has a buzzer that sounds during the read-in process and an LED indicator that goes out during the read-in process.
Our RFID module X3RP Dual Interface supports MF1xxS20, MF1xxS70 and MF1xxS50 tags and is therefore compatible with an X3 implant. In addition, the module can also read all NTAG® series chipsets, as well as MIFARE Plus and MIFARE DESFire® chipsets, so that X2 and X4 users can also read their implants. The module measures 36x34mm and has four drill holes. Through the LED bulb can be measured a height of 11mm.
The antenna reaches a reading distance of approx. 30mm. The read distance was tested with an implanted NFC implant X2.
Compatible implants
-
NFC Implant X2
49,90 € – 99,90 €
Includes 19% TaxFree ShippingNFC Chip Implant with sterile injection device and accessories
The NFC implant is delivered preloaded to the injection needle
With this set you get everything you need to implant an NFC chip yourself or at one of our partner piercers. The NTAG216 NFC 2 standard is compatible with all major NFC enabled devices. If you do not wish piercing service, simply select “without service”.
-
NFC Implant X3
79,90 € – 179,90 €
Includes 19% TaxFree ShippingMIFARE® Classic compatible chip implant
The NFC implant with 1K-4KByte memory and high compatibility.
With this package you get everything you need to implant a NFC chip at a piercer you trust. The X3 version enjoys a high level of acceptance among existing readers and smartphones due to the widespread use of the MIFARE® Classic chip.
-
NFC RFID Implant X2.1 Dual
79,90 € – 129,90 €
Includes 19% TaxFree ShippingDelivery Time: ca. 2-3 WerktageChip implant with two frequencies and sterile injection device
The chip implant is delivered preloaded to the injection needle
With this set you get everything you need to implant an NFC chip yourself or at one of our partner piercers. This chipset is compatible with all NFC-enabled smartphones (See compatibility list). In addition, the implant also features an EM4200 125KHz chipset. If you do not wish to have an intervention, simply select “Do not specify”.