Don’t be confused by the wide selection of NFC chip implants. We are happy to help you if you are unsure or can not decide. In general, however, it can be summarized – if you want to interact with a smartphone, i.e. write and read business cards or links via smartphone, the X2 NFC implant is the right choice. There are also additional modules for the X2 implant, such as the X3Z electronic locking cylinder. If you want to work with existing electronic locking cylinders and NFC access control systems that only support MIFARE Classic chipsets and you are not an Apple user, the X3 or X3 Elite is the right choice. If you would like to add your NFC implant to an existing access control system, we show you here how to determine the correct NFC chip implant.
-
NFC Implant X2
49,90 € – 99,90 €
Includes 19% TaxFree ShippingNFC Chip Implant with sterile injection device and accessories
The NFC implant is delivered preloaded to the injection needle
With this set you get everything you need to implant an NFC chip yourself or at one of our partner piercers. The NTAG216 NFC 2 standard is compatible with all major NFC enabled devices. If you do not wish piercing service, simply select “without service”.
The X2 NFC Chip Implant is the first NFC implant that could be program by smartphone and is still one of the best sellers. The reason for this is the small size of 2x12mm, which ensures almost painless implantation. In addition, the X2 NFC chip implant has excellent properties for uncomplicated writing via smartphone. The built-in formatted NTAG216 chipset has been specially developed for the end user and can be read by any NFC-capable smartphone. This is now also the case with the X3, but formatting the memory via Android smartphone and the app NFC Tools is usually necessary. The X2 is for those who mainly want to interact with the smartphone and are looking for a user-friendly chipset.
Versions
With the standard design that we have been offering for several years, very few people do anything wrong. Our bestseller responds smoothly on almost all smartphones and is also available in different sizes and ranges.
If you want to control LF devices with your X2 but still want to use the smartphone function, this is the right implant for you. This special version has two chipsets that can interact independently.
Compatibility
Android / iOS10
Readout range:
Direct contact-20mm
Configurable:
Size/Memory
Frequency:
13.56MHz (NFC)
Max. Temperature:
-40°C to + 90°C
Sizes:
2×12 mm
3×13 mm
Chipset type:
NTAG216
NFC Memory:
888byte
556byte
ISO protocol:
14443- 3A
14443- 2A
UID Length:
7byte
E.g.: E3 GB 55 8D GH U8 K8
-
NFC Implant X3
79,90 € – 179,90 €
Includes 19% TaxFree ShippingMIFARE® Classic compatible chip implant
The NFC implant with 1K-4KByte memory and high compatibility.
With this package you get everything you need to implant a NFC chip at a piercer you trust. The X3 version enjoys a high level of acceptance among existing readers and smartphones due to the widespread use of the MIFARE® Classic chip.
The X3 NFC Chip Implant is a real all-rounder and, thanks to the smartphone-supported NFC chipset, not only suitable for access systems. Like the X2, it can be read out with the Android or MS operating system without an app. Writing is possible with a writer such as the ACS U 122. The installed MIFARE Classic transponder is the most widely sold NFC transponder chipset and was originally designed for smart access systems. However, the large memory also makes this implant ideal for many other functions, which can be easily written to the implant using the NFC Tools app. This NFC chip implant is suitable for all users who need more memory than the X2 implant offers and have the possibility to write to the implant via USB Writer (ACS 122 U).
Versions
If you also want to light up with your X3, this is the right implant for you. An LED chipset has been added to the regular NFC chipset and is activated when an NFC field is approached. Attention: BETA phase presale
If you neither need a 125KHz function nor the possibility to change the serial number, you can choose the standard version of the X3 without hesitation.
The elite version of the X3 offers the option of changing the actual UID (serial number) using a reader. This means that existing Classic transponders can be cloned without having to teach the implant to an existing system.
Compatibility
Android u.
iOS10 NDEF
Readout range:
Direct contact-5mm
Configurable:
Size/Memory
Frequency:
13.56MHz (NFC)
Max. Temperature:
-40°C to + 90°C
Sizes:
2×12 mm
3×13 mm
3x15mm
Chipset type:
MIFARE Classic
compatible
NFC Memory:
1024Byte
4096Byte
ISO protocol:
14443- 3A
UID Length:
4Byte / 7Byte (X3 4KB)
E.g.: E3 GB 55 8D
-
NFC Implant X Range
29,90 € – 89,90 €
Includes 19% TaxFree ShippingNFC RFID Chip Implant with Sterile Injection Device
The low budget with less storage with all the more range!
With this set you get the chipset incl. Hypodermic needle. If you need more memory, we recommend the X2 or the X3 NFC implant. If you do not want an intervention from one of our partners, simply select “Without service”.
The X Range NFC implant with the built-in
iCode SLI chipset
is ideal if you value readout range and are still looking for an NFC chip implant in the low-budget sector. Unfortunately, you have to accept small compromises in terms of compatibility and storage space. The installed memory of 106 bytes is just enough for a business card. However, those who only want to exchange contact data or links with their NFC implant can access it here without hesitation. Unfortunately, the implant has to take a back seat when it comes to NFC access systems, since this ISO standard is rarely used for locking cylinders. Originally, this ISO standard was designed for industry and warehouse logistics, which also benefit from smartphone compatibility and high readout range despite the RF of
13.56MHz
benefits. This NFC chip implant is only suitable for those who want to read and write simple small data sets via smartphone.
Versions
– No special designs
Compatibility
Android u.
Readers
Readout range:
Direktkontakt-10mm
Configurable:
Size
Frequency:
13.56MHz (NFC)
Max. Temperature:
-40°C to + 90°C
Sizes:
3×13 mm
2×12 mm
Chipset type:
MIFARE® SLIX
NFC Memory:
106 bytes
ISO protocol:
15693
UID Length:
7byte
-
RFID implant X1
29,90 € – 89,90 €
Includes 19% TaxFree ShippingRFID implant with sterile injection needle
The RFID implant for home automation and access technology
This implant features LF RFID technology and can be integrated into existing locking systems. Thus, the batch or transponder card becomes obsolete. If you are unsure whether this technology is compatible with your access system, we recommend a test card or test implant to check compatibility.
The X1 RFID implant is based on a 125kHz chipset. This is intended exclusively for authentication of access devices and control units, as the chipset has a high range due to the low frequency. We offer this in two versions and two sizes each. The EM4200 chipset, is a read-only version and successor of the EM4102 chip. This version cannot be written, only read. Alternatively, the EM4305 chipset is also available, which can also be written using the corresponding writer. The advantage over the read-only chipset is that the serial number can be changed at will. Please note that both versions cannot be read or written with a smartphone. A corresponding reader / writer is necessarily needed to use the implant. This chip implant is only suitable for those who want to control door locks, control units, alarm systems, etc. with 125kHz and do not want smartphone NFC support.
Versions
The classic X1 i.e. EM4200 can only be read out and is used for 125KHz reading units like older access systems or to identify objects. Attention! The implant cannot be read out and described with a smartphone like the other implants.
X1 Elite
The Elite version of the X1 is writable and has the same “UID” feature as the X3 Elite. In addition, the Elite version (EM4305) has a 512bit EEPROM memory, as well as a 32 bit password function.
Compatibility
Only tax &.
Readers
Readout range:
~30mm
Configurable:
Size/Chipset
Frequency:
125KHz
Max. Temperature:
-40°C to + 90°C
Sizes:
2×12 mm
3×13 mm
Chipset type:
EM4200
EM4305
NFC Memory:
8Byte
512Byte
ISO protocol:
11784
11785
UID Length:
8Byte
Specialist Chipsets
The X4 NFC chip implant is based on a real microcontroller. Like our NFC standardized implants X2, X3 and Range etc., this can also be written to by means of many smartphones, since this NFC chip implant also has a formatted NDEF memory, but this implant is largely used for authentication. The very high security standard of 128bit AES encryption, provides optimal protection against brute force attacks and the like. In addition, the NFC chip implant has a number of applications that are themselves computed in the chipset such as binary and counting operations. The X4 has a 7Byte UID and a relatively large memory of optionally up to 8KByte. The X4 also takes advantage of ISO14443-4, so the integrated NXP DESFire® EV1 / 2K-8K chipset can be written to and read without an app by most popular smartphones. Since this chipset is very complex, the readout time can last up to 1 second, which sometimes leads to the user aborting the read-in process too hastily. This NFC chip implant is suitable for those who would like to delve deeper into NFC matter and depend on high security standard and large memory.
The X Shine implant is only a true NFC chip implant in the broadest sense, as it only uses the 13.56MHz frequency to power itself or the LED. The implant does not have a storage space or similar and is therefore categorized more as an aesthetic upgrade. The implant glows in neutral white, since you would only see a slight difference anyway due to the color change when it shines through the skin. The implant can be powered with an NFC-enabled smartphone or reader so that this starts to glow. This remains until the smartphone moves away to several centimeters. This varies greatly depending on the smartphone model. This implant is suitable only for those who are looking for a very special piercing.
Not found what you are looking for?
Write us your requirements via mail to support@iamrobot.de ! We have many more models and modifications.