X3W Cloned

This NFC Writer is designed for copying MIFARE Classic and EM4305 chipsets. Our in-house software supports not only the classic 125 kHz EM4200 and EM4305 LF transponders, but also NFC transponders in the 13.45 MHz range. Perfect for universal use to use a wide range of transponders with only one device. The included software creates DUMP files, i.e. images of transponders, saves them and copies the DUMP to another NFC transponder / implant if desired. The 125kHz range that can be used on the back of the device has the free input of new serial numbers and automatically calculates them in HEX if desired.

NFC RFID Reader Multi UID V2

A superlative NFC reader! Because you determine how the reader reads the UID / serial number of the chipset. This reader was designed to replace existing RFID readers without having to reassign all transponders, since readers without configuration options often interpret the UID differently than desired. With the included driver, the reader can be easily set up as you need the UID. As soon as a transponder or NFC implant is read by the NFC reader, it is read at the position where the courser is currently located. In addition, a <Enter> command can also be issued, so that the reader is also perfect for Windows or other log-ins.

NFC Reader Multi UID

This NFC reader, which is also operated with a USB Plug n Play method, can also read UIDs of all common implants and NFC transponders like its successor. However, this is limited to the 13.56 MHz frequency and can therefore read our X2, i.e. NTAG216, as well as the X3 series MIFARE Classic. This NFC reader is preferably used for log-ins, since you can also change the output format of the UID, as with version 2. Thus, the reader also supports the backward reading of the UID or the byteswitch which is often used with Asian access devices.

RFID NFC Reader X2R Stick

An NFC reader with direct USB A interface and is therefore perfect for use with mobile devices such as laptops or other devices with USB interface. With the alternatively selectable adapter, it is also possible to connect the reader to a modern USB C port, so that it can also be controlled via smartphone or tablet. As with the other NFC readers, the UID of the transponders or NFC implants is copied directly as text form into the currently selected text field. By default, the UID is interpreted and output as a 10-digit decimal number.

NFC Reader X2R Mobile

We offer this NFC reader mainly for the use of older smartphones with Micro USB port. Nevertheless, this NFC reader can of course also be connected to a PC or tablet and used with the corresponding adapter. The UID output format is fixed to 10 digits and cannot be formatted. If you want to use a USB A or USB C port, we recommend using this version as a stick.