NFC RFID Reader Multi-UID
34,90 €
NFC Reader suitable for X2, X3 and X3 Elite
With this USB NFC RFID Reader the serial numbers of our NFC implants can be read and individually interpreted.
Description
With this NFC RFID implant reader, not only the first 10 digits can be read numerically, as it is common with most readers, but you can determine yourself how the NFC RFID reader outputs the UID of the transponder. The included program provides for individual programming of the reader. The reader does not require a driver and is connected to the PC via USB. A keyboard is simulated so that when the transponder is read, the UID is received in the previously programmed format.
Furthermore, the NFC RFID Reader supports several chip sets of the ISO standard 14443A. The MIFARE® Classic transponders as well as NTAG216 chips.
Supported transponders:
MIFARE Classic® 1-4KB
MIFARE NTAG213,215,216
FUDAN S50
Formats:
5, 8, 10, 13 and 18 decimal places
5 and 8 hexadecimal characters
Last bytes of the UID
Sequence:
Forward
Backward
Reverse
Additional commands:
; Separations
Splitting
ENTER command
Step 1:
Connect the USB RFID Reader to the PC and start the program after unpacking it.
Step 2:
Select the option how you want to read in the UID with the reader in the future and confirm this with the “SET” button.