This RFID module with integrated 13.56MHz antenna, can be easily operated with an Arduino using an SPI interface. The module requires a 3.3V power supply, which can be provided by the Arduino board. The required current is maximum 80ua and works with 10-13mA.
The RFID Arduino RF522 module supports MF1xxS20, MF1xxS70 and MF1xxS50 tags and is therefore compatible with an X3 implant. In addition, the module can also read NTAG216, as well as MIFARE DESFire chipsets, so that X2 and X4 users will also be happy with the module. The transfer speed for MIFARE Classic transponders can be up to 424 kBits/sec. reach The module measures 37.5x25mm and has six drill holes. The antenna reaches a reading distance of approx. 20mm. This was tested using an NFC tag MIFARE NTAG216 transponder.
49,90 € – 99,90 €Includes 19% TaxFree ShippingDelivery Time: sofort lieferbar
NFC Chip Implant with sterile injection device and accessories
The NFC implant is delivered preloaded to the injection needle
With this set you get everything you need to implant an NFC chip yourself or at one of our partner piercers. The NTAG216 NFC 2 standard is compatible with all major NFC enabled devices. If you do not wish piercing service, simply select “without service”.
79,90 € – 179,90 €Includes 19% TaxFree ShippingDelivery Time: sofort lieferbar
MIFARE® Classic compatible chip implant
The NFC implant with 1K-4KByte memory and high compatibility.
With this package you get everything you need to implant a NFC chip at a piercer you trust. The X3 version enjoys a high level of acceptance among existing readers and smartphones due to the widespread use of the MIFARE® Classic chip.
79,90 € – 129,90 €Includes 19% TaxFree ShippingDelivery Time: ca. 2-3 Werktage
Chip implant with two frequencies and sterile injection device
The chip implant is delivered preloaded to the injection needle
With this set you get everything you need to implant an NFC chip yourself or at one of our partner piercers. This chipset is compatible with all NFC-enabled smartphones (See compatibility list). In addition, the implant also features an EM4200 125KHz chipset. If you do not wish to have an intervention, simply select “Do not specify”.